Products, Long Products Division

Long Products Division

Chandan Steel Limited’s facility is capable of producing 40,000 tons of finished products per annum and caters to a wide range of industries; including waste management systems (water treatment), chemical industries and oil and gas industries (Oil Filters).

Download Brochure

Products	Size Range	Specifications	Supply Conditions	Tolerance
SS Cast Billets (Square)	100 mm upto 220 mm		Fully Ground or spot Ground, Smooth ends, Suitable for Rolling, Forging, Upsetting and various other applications.
SS RCS (Rolled Billets)	40 mm upto 100 mm		100% UT, Fully Ground or spot ground, free from surface defects or cracks, smooth ends, suitable for re-rolling, forging, upsetting and various other applications.
SS Ignots	11” x 13” x 52” 14" x 17" x 72" 17" x 21" x 72"		Fully Ground or spot ground, Smooth ends, Suitable for Rolling, Forging, Upsetting and various other applications.
SS Round Bar	3 mm upto 150 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled, Cold Drawn, Centreless Ground, Smooth Turned, Rough Peeled, Peeled and Polished, High Tensile, Chamfered	H9, H10, H11, K12, K13, EN 10060
SS Square Bar	5 mm upto 50 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled, Cold Drawn and Polished	H11, EN 10059
SS Hexagonal Bars	5 mm upto 50 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled, Cold Drawn and Polished	H11, EN 10059
SS Equal Angles	19x19x3 mm upto 150x150x15 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled Annealed and Pickled	ASTM A484, EN 10056
SS Un-Equal Angles	30x15x3 mm upto 150x100x15 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled Annealed and Pickled	ASTM A484, EN 10056 P1 & P2
SS Flat Bars	20x4 mm upto 150x30 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled Annealed and Pickled	ASTM A484, EN 10058
SS U-Channels	50.80 x 25.40 x 4.76 mm 50.80 x 25.40 x 6.35 mm 75 x 40 x 4.7 x 6.9 mm 76.20 x 38.10 x 6.35 mm 80 x 40 x 6 mm 80 x 45 x 6 x 8 mm 100 x 50 x 6 x 8.5 mm 101.60 x 40.13 x 4.57 mm 101.60 x 43.69 x 7.93 mm 101.60 x 44.45 x 6.35 mm 130 x 65 x 6 x 6 mm 152.40 x 48.77 x 5.08 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled Annealed and Pickled	ASTM A484, EN 10279
T-Profile	50 x 50 x 5 mm 50 x 50 x 6 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Hot Rolled Annealed and Pickled	ASTM A484, EN 10055
SS Wire	0.5 mm upto 6 mm	EN, DIN, ASTM, AISI, ASME, JIS, NACE	Soft Finish with Matt or Bright Condition, ¼ Hard (Suitable for Electro Polish Quality), ½ hard, Full Hard with Coated or De-Coated Condition, Soft Annealed, Matt Finished, Bright Finish	H9, H11
SS ReInforcement Bars	8 mm upto 40 mm	BS 6744	Hot Rolled and Pickled

Materials also available in special calcium treated and high sulphur conditions for Improved Machining.

For more information on grades & product sizes kindly email info@chandansteel.com.